Insulation in the roof and walls is clearly beneficial for its ability to reduce heating and cooling losses and costs. The savings achieved by reducing heat transfer by conduction justifies the cost of adequate insulation.
But don’t forget that convection is another source of heat transfer when air moves between two spaces. Minimizing or controlling losses via convection is desirable but requires more consideration. Adequate outside air is necessary for breathing, and sufficient air transfer is required to ventilate other gases and odors from interior spaces.
Most homes are so leaky that there is plenty of opportunity for air to intrude and be enough for the occupants. However, as structures become more air-tight and interior materials become more synthetic, there is the possibility that the indoor air quality is compromised.
Although the emphasis on saving home heating and cooling energy has been on attic insulation, exterior walls have a similar surface area that transmits energy.
Homes built prior to 1960 had no insulation or at best R-5. Between 1960 and 1980’s average R values increased to about R-11.
Insulating wall cavities that were empty or under-insulated will save energy. A 2″ x 4″ stud framed wall filled with expanding foam insulation will provide an insulating value of R-22.
Before insulating side walls you need to find out what is in there. Visual inspection through openings may reveal what is already in place, if anything, or an infrared thermal imaging will reveal heat loss in areas that are hidden or have varying insulating value.
Fire resistant foam insulation contains fire retardant, and some are specifically formulated for fire resistant use. If you need a fire resistant foam for insulation, be sure to choose one specifically marketed as such. These products possess a higher degree of fire resistance than standard foam insulation.
Fire Resistant Applications include :
– fire resistant installation of window and door frames
– fire and smoke resistant sealing of connections between walls, ceilings and floors
– sealing of all openings in roof constructions
– sealing of cable and pipe penetrations in walls
– improving thermal insulation in heating and cooling systems